| Hioki-3196 |
| Monitor
and record the quality of power to analyze the cause of trouble when it
occurs ! |
| The
3196 is your most reliable and complete instrument for power quality
troubleshooting ! |
|
|
| Measure power factor |
|
| Sags |
|
| Swells |
|
| Flicker |
|
| Transients |
|
| Harmonics to the 50th |
|
| High
Frequency transient |
| Detection
and waveform display |
| Four
current and Four voltage channels |
|
|
| Let
the HIOKI 3196 see what you have been missing. |
|
|
| Especificaciones
básicas |
| Measurement
lines |
Single-phase/two-wires,
Single-phase/three-wires, Three-phase/three-wires, Three-phase/four-wires |
| Measurement
items |
Impulsive
voltage quality:Transient overvoltage (Impulse), RMS voltage quality:Voltage
swell, Voltage dips, Voltage interruption, Power quality:Frequency, Voltage,
Current, Current peak, Active/Reactive/Apparent power, Power factor
(displaced power factor), Three phase quality:Voltage unbalance ratio,
Current unbalance ratio, Harmonic quality (Up to 50th order):Harmonic
voltage, Harmonic current, Harmonic power, Inter-harmonic voltage,
Inter-harmonic current, Harmonic voltage current phase angle, Total harmonic
voltage distortion, Total inter-harmonic current distortion (THD-F, THD-R),
Total inter-harmonic voltage distortion ratio, Total inter-harmonic current
distortion ratio (THD-F, THD-R), K factor, Flicker:Measures delta- V10
flicker (Japanese domestic), or IEC flicker [Pst, Plt] (international
standards), |
| Measurement
ranges |
Voltage ch1 to
ch3: 150.00 to 600.00 V AC rms-3 ranges, ch4: 60.000 to 600.00 V AC rms-4
ranges, or 60.000/600.00 V DC-2 ranges, Current (When using 100 A sensor):
50.000/100.00 A AC rms-2 ranges, Current (When using 500 A sensor):
50.000/500.00 A AC rms-2 ranges, Current (When using FLEXIBLE CLAMP ON SENSOR
9667): 500.00 A / 5000.0 A AC rms-2 ranges, Current (When using CLAMP ON
SENSOR 9669): 1000.0A AC rms-1 range, Current (When using CLAMP ON SENSOR
9694): 5.0000A / 50.000 A AC rms-2 ranges, Power: Combination pattern of
voltage and current ranges |
| Measurement
method |
Transient
overvoltage: 2 mega-sampling/sec, Harmonic wave: 2048 point (10 cycle at 50
Hz, or 12 cycle at 60 Hz), Other effective value: 256 point/one cycle |
| Memory
capacity |
13 MB |
| Interface |
PC card slot
(9726/ 9727/ 9728 PC card, 128MB to 512MB), RS-232C, LAN (10BASE-T) |
| Power supply |
12 V DC output
AC ADAPTER 9458 (Universal 100 to 240 V AC, 50/60 Hz), or BATTERY PACK 9459
(7.2 V/2450 m Ah Ni-MH) |
| Dimensions,
mass |
298 mm(11.73
in)W × 215 mm(8.46 in)H × 67 mm(2.64 in)D, 2.25 kg (79.4 oz)...within battery |
| Accessories |
Voltage cord
(one set), AC ADAPTER 9458 (1), BATTERY PACK 9459 (1), shoulder strap (1),
LAN connector cover (1), marking label (1), Down96 (data download software) |
|
|