BS-2
When the tip surface starts to oxidize during operation, it becomes dark and does not wet properly. To improve work efficiency, use the Tip Refresher.
HOW TO USE			Model	BS-2
1.	Optimum tip temperature for refreshing the tip is from 300-360°C.		Item	Tip Refresher
2.	Dip the tip in the Tip Refresher.		Composition	Ammonium phosphate, Tin Powder
3.	Apply solder to the tip and then clean completely with the sponge on the soldering iron stand (goot ST series).		NET Content	9g
4.	Apply solder to the tip again. The tip is now tinned and wetting is restored. If the tip is still not wetting properly, repeat steps 2 and 3 above.