| MFR-PTZ |
| MFR-PTZ PRECISION TWEEZER, SOLDERING & REWORK
SYSTEM |
| Part
No. |
Description |
| MFR-PTZ |
Precision
Tweezer, Soldering and Rework System |
| INCLUDES |
|
| MFR-PS1K |
Two Port
Universal Voltage Power Supply |
| MFR-HPT |
Precision
Tweezer Hand-piece |
| MFR-WSPT |
Tweezer
Workstand |
| MFR-HSR |
Cartridge
Solder / Rework Hand-piece |
| MFR-WSSR |
Soldering
Workstand |
|
|
|
| MFR-PTZ,
MFR-SRC, MFR-PST, MFR-STZ |
|
|
|
|
| Ambient
Operating Temperature:10- 40°C |
| Maximum Enclosure
Temperature:55°C |
|
| Input
Line Voltage:100- 240 VAC, grounded circuit |
| Input Line Frequency:50/60 Hz |
|
| Power Consumption:65 Watts max. |
|
| Output
Power: 50 Watts max. at 22°C ambient temperature |
| Output Frequency:450 KHz |
|
| Power Cord 3-Wire:183cm (18/3") SJT |
|
| Power
Supply Dimensions w x d x h: 122mm x 200mm x 152.5mm
(4.8" x 8" x 6") |
| Agency
Tested Per:IEC 61000-6-1,EC 61000-6-3 and UL499, FCC CFR
Part 15 |
| Tip-to-Ground Potential:< 2mV |
|
| Tip-to-Ground Resistance:< 2 ohms |
|
| Idle
Temperature Stability:± 1.1°C in still air |
| Hand-piece
Cable Length: L=71cm (48"), burn proof, ESD safe |
| Connector:8-pin
power connector |
|
| Workstand
Dimensions w x d x h:100 mm x 200 mm x 100 mm (4" x
8" x 4") |
|
|
|
|