| Hioki 3281 | ||
| AC Current/Voltage, Frequencies, Resistance, Conduction check, Temperature (probe sold separately) | ||
| Wave peak value, Waveform distortion check | ||
| Auto-power off to prevent the power from being left on | ||
| Non-fuse type protects up to 600 V AC | ||
| Especificaciones básicas | ||
| AC Current range | 30.00 to 600 A AC, 3 ranges (±1 % rdg. ±5 dgt. at 50 or 60Hz), Effective value rectifier | |
| Wave peak value at AC Current | 30.0 to 600 A peak, 3 ranges (±3 % rdg. ±5 dgt. at 50 or 60Hz) | |
| AC Voltage range | 300.0 or 600 V AC, 2 ranges (±1 % rdg. ±3 dgt. at 50 or 60Hz), Effective value rectifier | |
| Wave peak value at AC Voltage | up to 300 or 600 V peak, 2 ranges (±3 % rdg. ±5 dgt. at 50 or 60Hz) | |
| Other functions | Distortion check: 1 to 5 Crest factor, Resistance: 1 k or 10 k-ohm range, Temperature: -50 to 150 °C (9462 TEMPERATURE PROBE required, sold separately), Frequency: 100 or 1000 Hz, Mode: Slow/Peak/C.F./RMS/Record mode/Auto-off/Conduction | |
| Analog output | None | |
| Frequency characteristics (at AC current / voltage) | 40 to 1000 Hz | |
| Display section | Digital / 3000 dgt. Bar graph / 35 seg. | |
| Sampling rate | 2 or 4 times/sec (Slow: 1 times/3 sec) | |
| Crest factor (RMS) | 2.5 (1.7 at 600 A, 600 V range) | |
| Max. circuit voltage | 600 V AC rms (insulated wire) | |
| Power supply | 6F22(006P) × 1, Continuous use 45 hours | |
| Core jaw dia. | Ř 33 mm(1.30 in) | |
| Dimensions, mass | 62 mm(2.44 in)W × 218 mm(8.58 in)H × 39 mm(1.54 in)D, 350 g (12.3 oz) | |
| Accessories | TEST LEAD 9207-10 (1), CARRYING CASE 9399 (1), Hand strap (1) | |
| Hioki 3282 | ||
| AC Current/Voltage, Frequencies, Resistance, Conduction check, Temperature (probe sold separately) | ||
| Wave peak value, Waveform distortion check | ||
| Auto-power off to prevent the power from being left on | ||
| Non-fuse type protects up to 600 V AC | ||
| Especificaciones básicas | ||
| AC Current range | 30.00 to 1000 A AC, 3 ranges (±1 % rdg. ±5 dgt. at 50 or 60Hz), Effective value rectifier | |
| Wave peak value at AC Current | 30.0 to 600 A peak, 3 ranges (±3 % rdg. ±5 dgt. at 50 or 60Hz) | |
| AC Voltage range | 300.0 or 600 V AC, 2 ranges (±1 % rdg. ±3 dgt. at 50 or 60Hz), Effective value rectifier | |
| Wave peak value at AC Voltage | up to 300 or 600 V peak, 2 ranges (±3 % rdg. ±5 dgt. at 50 or 60Hz) | |
| Other functions | Distortion check: 1 to 5 Crest factor, Resistance: 1 k or 10 k-ohm range, Temperature: -50 to 150 °C ( TEMPERATURE PROBE 9462 required, sold separately), Frequency: 100 or 1000 Hz, Mode: Slow/Peak/C.F./RMS/Record mode/Auto-off/Conduction | |
| Analog output | None | |
| Frequency characteristics (at AC current / voltage) | 40 to 1000 Hz | |
| Display section | Digital / 3000 dgt. Bar graph / 35 seg. | |
| Sampling rate | 2 or 4 times/sec (Slow: 1 times/3 sec) | |
| Crest factor (RMS) | 2.5 (1.7 at 1000 A, 600 V range) | |
| Max. circuit voltage | 600 V AC rms (insulated wire) | |
| Power supply | 6F22(006P) × 1, Continuous use 45 hours | |
| Core jaw dia. | Ř 46 mm(1.81 in) | |
| Dimensions, mass | 62 mm(2.44 in)W × 230 mm(9.06 in)H × 39 mm(1.54 in)D, 400 g (14.1 oz) | |
| Accessories | TEST LEAD 9207-10 (1), CARRYING CASE 9399 (1), Hand strap (1) | |