| Hioki-3522-50 |
| Better
functionality and performance at a low cost |
|
|
| High
speed measurement of 5 ms LCR meter |
| Higher
frequency range (DC or 1 mHz to 100 kHz) |
| Fourteen
parameters measured (High resolution and high accuracy) |
| DC resistance measurement |
|
|
|
| Especificaciones básicas |
|
| Measurement parameters |
|Z|,
|Y|, phase angle, Rp(DCR), Rs(ESR, DCR), G, X, B, Cp, Cs, Lp, Ls,
D(dissipation factor), and Q |
| Measurement method |
Source:
constant current 10 µA to 100 mA(AC/DC), or constant voltage 10 mV to 5 V
(AC/DC) |
| Sense: voltage, AC or DC |
| Source
frequency |
DC,
or 1 mHz to 100 kHz |
| Measurement ranges |
|Z|,
R, X: 10.00 m-Ohm to 200.00 m-ohm (depending on condition), phase angle:
-180.00 to +180.00°, |
| C: 0.3200 pF to 1.0000 F, L: 16.000 nH to 750.00 kH, D: 0.00001
to 9.99999, Q: 0.01 to 999.99, |
| |Y|, G, B: 5.0000 nS to 99.999 S |
| Basic
accuracy |
|Z|:
±0.08 % rdg. , phase angle: ±0.05 ° |
| Measurement times typical values for displaying |Z| |
Fast:
5 msec. to Slow2: 828 msec. |
| Display |
99999
full digits, LCD with backlight display |
| Comparator
functions |
Setting:
Upper and lower limit, percentage, or absolute value, Output: 3 levels (Hi,
In, Lo), Open-collector, Isolated |
| External
printer |
9442
(use with the 9443-02 or -03/9446/9593-01) |
| Power supply |
100
to 240 V AC (selectable type), 50/60Hz |
| Dimensions,
mass |
313
mm(12.32 in)W × 125 mm(4.92 in)H × 290 mm(11.42 in)D, 4.5 kg (158.7 oz) |
| Accessories |
Power
cord(1), Fuse(1) |
|
|
| Para otros modelos
de la serie consulte a info@drihm.com |
|
|