Hioki-3660
For a Perfect Network
Wire map check for checking wiring during installation
Cable length check for detecting the location of cable breaks
Direction check for confirming cable connections
Basic specifications
Measurable cable	UTP cable: Characteristic impedance 100 ohm , CAT 3, 4, 5, 5e
Measurable connector	RJ-45 connector
WireMap check	Can check wiring status using the WIREMAP TERMINATOR 9336
	Error detection: Open, short, other wiring errors
	(Split pairs cannot be detected.)
Cable length check	Measured length: 2 to 300m
	when results are displayed in feet: 6.6 to 984 ft
	Measurement accuracy: ± (15% rdg. + 1 m)
	when results are displayed in feet: ± (15% rdg. + 3.3 ft)
	Display resolution: 0.1 m
	when results are displayed in feet: 0.3 ft
Direction check	Can identify five cables using the optional DIRECTION TERMINATOR 9337
Display	LCD
Power supply	LR6(AA) alkaline battery × 6, Continuous use 250 hours
	(when measuring once per minute)
Dimensions, mass	98 mm(3.86 in)W × 160 mm(6.30 in)H × 38 mm(1.50 in)D, 290g(10.3 oz)
Accessories	WIREMAP TERMINATOR 9336 (1), CARRYING CASE 3853(1)