PX-501 AS / PX-601 AS
Low cost, high performance models that offer accurate temperature control and easy operation.
Newly designed ergonomic grip cover.
Reaches set temperature extremely fast due to the Quick Start circuit.
Temperature calibration volume comes as standard.
This anti-static model assures safe soldering of precision components that are easily damaged by static-electricity. Anti-static materials are used in the handpiece, control unit and soldering unit cord where static-electricity can be easily generated. This means that destructive static electricity is not generated when soldering.
Model		PX-501AS	PX-601AS
Voltage		110-130, 220-240V AC  50/60Hz
Power Consumption		80-85W
Soldering Unit Voltage		110, 220-240V AC / 80W
Temp. Setting Range		250—450ºC	250—450ºC
Temp. Control System		Sensor Feedback ( ON-OFF Control)
Insulation Resistance (500V DC)		Over 100MΩ
Dimensions	Soldering Unit	195mm (w/o cord bushing)
	Control Unit	85(L)×100(W)×57(H)mm	130(L)×48(W)×31(H)mm
Weight	Soldering Unit	41g (w/o cord)
	Contol Unit	266g (w/o cord)	75g (w/o cord)
Ripple Temp. without Load		±3ºC
Leak Voltage		Less than 0.1mV
Ground Resistance		Less than 0.1Ω
Control Unit to Soldering Unit cord Length		1.2m
Power Cord Length		1.5m (3 core cable) ground plug